Snipe Feathers & Soggy Duns

Getting ready for tomorrow's fishing...

Windy Day Rod Testing

I took advantage of the seasonal time change and arrived to NE Iowa early. I strung up the new McFarland for its maiden voyage. The day turned out to be quite nice, but it was really windy, with the bright blue sky and plenty of sunshine. The water was cold and trout were lethargic at first. Early on I missed several fish on a leech, since they would only touch the fly and run away. As it was getting warmer, the fish were becoming more aggressive. I used small Waterloo Leeches in vine, black and brown and all of them worked well.

The rod performed admirably. I loved the way it handled the wind and the weighted flies. It wasn't until noon that first sporadic risers started to appear in the riffles. I switched to the Baetis dun imitation and thoroughly enjoyed the rod, casting pile casts on the swift riffle, and fighting the feisty browns (second photo). The blank has all characteristics of a first rate glass blank-a fine tip calibrations and superb dampening, with tip wobble brought to the bare minimum, and plenty of power at the bottom for long casts and fish fighting. I haven't had a chance to try other McFarland blanks, but this one feels like a fine precision tool. Presentation casts are easily executed with this rod-it almost casts itself.

After the tea break (Earl Grey White Tip), I spent another hour on the stream with my Lamiglas 8' 5wt and Milward's Flycraft reel. This is the first time I fished the reel and absolutely loved it! I hooked and landed a nice brown on 7X and size 18 fly, and several smaller ones from the same riffle (third photo). Milward has the sweetest click . The wind was coming in powerful gusts, and Lami would roll and switch cast with slow ease. I caught a lot of fish on it this Summer and Fall and became quite fond of it. However, I consider it somewhat of a specialty tool.

New Rods

I have just finished a couple of new rods.

The first one is another vintage Lamiglas (dark brown usanded blank). It is a strong, 7'6" 5 piece rod, which works best with lines 6, 7 or 8. I built this rod mostly for warmwater fishing. It is a bit too powerful for trout fishing around here.

I turned a Ritz grip, and used a Pac Bay (Powell style) metal seat, partially inleted. The short 1/2" fighting butt is made of decorative cork, as well as the first ring of the grip. For the stripper, I used the vintage agatine guide in red/orange color.

The second rod is built on McFarland Dry Fly Taper E-glass blank. It is a 7'10" #4 in a 4 piece version. The blank color is dark amber brown ("flamed cane"), with white spigots. I used the Struble D-8 seat with myrtle insert, and I turned the straight Garrison grip. The vintage agate guide has a plum stone, and I used the Snake brand snake guides on this rod. I also experimented with ferrule plugs of wood and cork I turned on my hobby lathe-they work just fine! Pictured below is the rod with Edgar Sealey Flylyte reel (by J.W. Young) from 1965.

Reel seats

I got hold of some nice reel seats for my current and future rod-building projects. Pictured on the left are Struble D-2 and D-8 models, with blued and bright nickel silver hardware. My original plan was to bronze-tone the bright D-8, using the bronzing solution, but I decided to use it as is, for my half-finished McFarland blank.

I have also recently made this all cork down-locking seat, pictured on the top. I used some leftover parts, including the stainless steel ring, as well as the combination of Copano burl cork and the regular cork. It will probably be used in the upcoming months, perhaps for some short, light line glass rod.

Waterloo in the Fall

Amy and I hit the Waterloo Creek on Saturday (10/13), on our way up from Decorah. The weather was perfect, with the very light wind. This was her first outing on this water, and we decided to fish the wild fish section of the stream.

We found two typical Fall hatches on the stream-very small olives (Plauditus punctiventris) and larger Baetis sp. hatching sporadically. Around 1:00 PM we found a bunch of rising fish, who took BWO imitations in sizes 16-20. Little Rabbit Foot emergers and duns got the job done and my Country Gentleman Variant dries took fish successfully. Amy stayed with the surface flies for the entire afternoon, while I fished Buggers upstream, throughout the quiet pools, where there would be no apparent activity on the surface. I managed one nice 15' brown on the hopper pattern. Bugger produced in the riffles, too. Grasshoppers were active on the banks and they can be productive on this stream well into November, depending on the weather.

We didn't get any giants, but enjoyed the steady action, finishing near the upstream bridge around 4:00 PM, tired and happy. I will try to make another trip (depending on the weather) in the next week or so. My plan is to test the new McFarland Dry Fly taper glass rod I am working on right now.

Another season winds down...

This last weekend of trout season 2007 in WI and MN wasn't particularly eventful, due to the stormy weather we had. Nevertheless, the fishing has been great for the past couple of weeks.

I made a trip to the Trout Run and although it survived some serious flooding, it was in a great shape. The fish took BWO emergers on the top, and small PT nymphs took care of the subsurface feeders. I wasn't able to locate some large fish in their usual spots, but there were plenty of trout around. The recent bank improvements were not damaged during the floods. I expected to find some hopper action in the lower stretches, but in spite of the fact that it was windy and grashoppers were plentiful, the fish did not respond to hopper imitations.

Rush River had some localized but intense BWO hatches and you had to walk to find a good action. I was able to find it each time I visited the river. I didn't get any giants but found some nice, hard fighting, but often tippet shy fish who would smash BWO imitations in sizes 18-20.

Pine Creek improvement in the lower section of the stream has been finished. They have built a nice parking lot with the inscription dedicated to Amy's grandparents (picture on the left.) I fished the creek several times during the past ten days and the fishing has always been exciting. I did not get many large brookies in comparison to the last September, but enjoyed the consistent action. The stream is becoming more popular and that is my only complaint. You can see the pictures of the same stretch of the creek taken last September (left, below) and several days ago (center, below). The bank improvement looks great and should increase both the numbers and the size of fish.

I finished the season with the side trip to the Kinnie, two days ago. The stream was slightly stained, but I found some fish on the top, feeding on small olive duns. Each time I fish this stream I remind myself that I really should fish it more often, since it takes only 30 minutes for me to get there. Here are a couple of pictures of the stretch I fished (below), taken in the late afternoon. (I decided not to take any fish pictures, anyway.)

I will be waiting for some warm days in October and November to visit streams in NE Iowa.

BWO

For the past several days I have been witnessing some exciting BWO hatches on the streams of the Driftless area. Here is the imitation I prefer to fish any time BWO's are hatching...

Hook: TMC 531 (size to match the naturals-this is 1X short hook)
Tail: olive angora/lite -brite blended dubbing (short) and wood-duck fibers (long)
Body: olive turkey biot
Thorax: opossum dubbing, slightly teased out
Wing: grey rabbit foot hair (or natural cream, for visibility)

Waterloo after floods

After several months I visited one of my favorite Midwestern spring creeks-Waterloo Creek near Dorchester, IA. The high water marks, flattened weeds and eroded banks were clear reminders that recent floods were devastating for many streams in SE MN and slightly less for the NE IA. Luckily, Waterloo looked and fished great yesterday afternoon. DNR bank improvements held out pretty well against the raging currents-only a single wall in the C & R section had some damage.

As it is always the case after the flood, the stream bed changed in certain locations. Certain holes were filled out, but the stream was in a nice shape. I fished mostly grasshoper imitations on my Lami 8' #5 and switched to brown leeches at the end of the day. The winds were gusting, but the sky eventually cleared and the fishing was just geting better by the time I had to head home.

Waterloo browns were willing, but slightly more finicky than usual. I landed nine fish-half a dozen on hoppers and three on leeches. I haven't hooked any giants, but all trout were in perfect shape and hard-fighting. I'll be visiting Waterloo soon again, once the season closes in MN and WI.

Back in Boston

My trip to Boston (and Bethel, ME) was truly memorable, even though my fishing time was pretty restricted. Each time I return to Boston it feels like going home to me-too many happy memories of old friends and fun times... As soon as we arrived, I drove around Winthrop, checking out our old place and my favorite fishing locations. I had two evenings reserved for fishing, and I fished only an hour or two each evening-that was all I could squeeze between visits to familiar places (including my favorite library in the USA and coffee shops I used to play in), errands and time spent with friends...

I fished various locations around Winthrop and Revere both evenings. Spring tides and strong SE winds brought plenty of debris along the beaches, and I found plenty of juvenile bunker each night. Unfortunately, there were no stripers or blues crashing the bait. I can only imagine how the fishing in the harbor will be in a couple of weeks, with the fall migration under way...

I have brought along my latest creation, a travel saltwater glass fly rod built on a vintage Lamiglas blank. Even though the catching was not great, I had a great time testing the new rod. The old Lami blank is unsanded and much faster in action than the contemporary Lami Honey blanks. I suspect it is an older S-glass model ( I actually have another in dark brown color), and it reminds me of a graphite, but it is heavier and little smoother.

The rod throws ST10 head effortlessly! Its shorter length worked reasonably well while wading shallow coves and flats, but it is too short for serious surf work. However, it is a great boat rod, and being shorter, it has lower swing weight and it is not too tiring to cast for longer periods. It would also be a great tool for fishing smaller pelagic species, where vertical lifting becomes crucial. I paired it with the Ross Big Game 4 reel, and it balances perfectly.

I must admit I was disappointed I haven't had a chance to properly 'baptize' the new rod. However, I will make sure I visit the Beantown every summer from now on... You can view the pictures of the rod below.

Brook Trout and Lamiglas 7' 3wt

I have just finished another glass rod-Lami 7' 3wt 4pc, built on older blank from Clemens Tackle. I've been using the two piece version of the same model for the second season now, and both rods have pretty much identical actions and flex-profiles. The four piece version has just so slightly more stable tip, which I prefer.

Amy joined me for an afternoon trip to the favorite brookie stream to try the new rod. It was a beautiful summer day, perfect for wet wading. Consistent breeze proved to be a good test for the soft rod. Brookies vere active despite the hot weather, but I didn't connect with larger fish. I ended up with at least a dozen fish-most of them in the 7-8' range. Majority of the fish took a foam hopper and I got a few on the beetle imitation. Unfortunately, I forgot to charge the camera battery and Amy ended up with the single photo (see above) before it went dead.

On our way back, we discovered an excellent, newly opened cafe and enjoyed our macchiato and biscotti.

You can see the close-ups of the new rod below...

Flatwings

I am slowly getting ready for my Boston trip in August and tying some flies for stripers. Most of my recent flies have been flatwing-type, inspired by writings of Ken Abrames and fishing methods described in Jock Scott's " Greased Line Fishing for Salmon." Two flies pictured are my (slightly tweaked) version of Abrames' Squidazzle (above) and the classsic Antlantic salmon fly, General Practitioner-a great shrimp/prawn imitation (below).

Baptism of the 8' 5wt Lami

I went to the local spring creek yesterday, to try the new rod. It’s been a pretty windy year around here and the 5wt rod was a good choice. I usually fish 7’ 6” 4wt or 7’ 3wt Lamis on this stream, but the 8-footer performed admirably. It felt comfortable and fairly precise in close. The casting stroke needs to be relaxed and the smooth loop would follow-I used a WF5. What surprised me the most was the power this rod has in comparison with his shorter ‘brothers.’ Just for the fun, I shot some longer casts in the shallows, into the archways of the slab bridge. With the haul, the rod was able to produce pointy loops into the wind. I closely observed the loop shapes… The rod is capable of producing nice loops without little wave-like formations in the bottom leg of the loop. They are fairly common on most fiberglass rods, since the tip-wobble is so typical for glass. This would be a nice rod to fish in lower sections of some trout streams around here, where you can expect a mixed bag of trout and smallmouth bass.

I managed to hook six browns, and landed five of them. There was no hatch going on and the fish would not take beetles nor ants, but went for soft hackles fished on the greased line and CDC Loopwing Caddis Emergers. Below is a picture of the first brownie caught on the rod. The rod handled 6X and 7X tippets with absolutely no problem. The little extra length proved really handy in turning trout when they would rush into the thick weeds. I can't wait to try it with grasshoper imitations in the upcoming months.

Lamiglas Honey Glass 8' 5wt

I have just finished this rod, built on a Lamiglas E glass blank. It is currently very hot and windy-not the greatest fishing weather, but I am hoping to test it on the water sometime during the next week. It is soft actioned and I am hoping to use it for nymphs, wets, and hoppers. I shot some close-up photos of the rod which you can see as a collage below. The main wraps are tan, with rust and chestnut trims. Notice how tan becomes translucent on the yellow blank. The reel seat insert is burled walnut, and I used single foot Ti guides and H&H stripper.